Vibration Meter

Pen Vibration Meter

Pen type, Acceleration, Velocity, IP-65 Metric & Imperial unit VIBRATION METER Model : PVB-820

FEATURES:

  • Applications for industrial vibration monitoring :All industrial machinery vibrates. The level of vibration is a useful guide to machine condition. Poor balance,misalignment & looseness of the structure will cause the vibration level increase, it is a sure sign that the maintenance is needed.
  • Pen type digital vibration meter, vibration sensor is built in, all in one. 
  • Acceleration, Velocity measurement, RMS measurement value.
  • Metric & Imperial display unit.
  • Frequency range 10 Hz - 1 kHz, sensitivity relative meet ISO 2954.
  • Microcomputer circuit, intelligent function, high accuracy. 
  • LCD display, easy read out.
  • Complete set with the Test pin and the Magnetic base are the standard accessories.
  • Built-in low battery indicator.
  • Heavy duty & compact housing case
  • IP65 protection.
  • Compact size, light weight.
  • Soft carrying case is the optional accessory 

GENERAL SPECIFICATIONS :

  • Display LCD, size : 20 mm x 28 mm. 
  • Measurement: Velocity, Acceleration. * RMS value.
  • Function: Acceleration - m/s2 , g, ft/s2 : Velocity mm/s, cm/s, inch/s
  • Frequency 10 Hz to 1 KHz
  • Operating temperature 0 to 50 ( 32 to 122 ).
  • Operating humidity Less than 80% RH.  
  • Power supply DC 1.5V battery ( UM-4/AAA ) x 4 PCs.  
  • Power consumption:Approx. DC 12 mA. 
  • Weight 240 g ( 0.53 lb ).
  • Dimension Meter : 175 x 40 x 32 mm ( 6.9 x 1.6 x 1.3 inch ) Meter without sensing head, Sensing head : Round 9 mm Dia. x 30 mm. 

Accessories
  • Instruction manual......................... 1 PC. 
  • included Meter with sensing head................. 1 
  • Set Magnetic base................................ 1 PC. 
  • Soft carrying case, CA-52A........... 1 PC.

    Vibration Meter

    This product adopts piezoelectric effect of artificial polarized ceramic for design. It is suitable for monitoring of all kinds of vibrating mechanical facility, specially the vibration measurement of rotating and reciprocating machinery. The unit can measure acceleration, velocity and displacement, which is widely used in mechanical manufacture,electric power, metallurgy and general aviation etc. field.

    APPLICATIONS :
    • To check motors pumps heavy machinery etc.
    • To check bearing condition
    • To check the Lubrication in machinery
    • To check mis alignment
    • To check for looseness in motors
    • To check for imbalance in machinery


    FEATURES :
    • Visually displays measurement value & state
    • Acceleration, Velocity and displacement measurement
    • Different vibration frequency selection
    • High sensitivity probe for accurate measurement
    • provides long and short probe head, each one is suitable for different situation measurement.
    • Equipped with AC signal output interface
    • Low power indication function? Auto power-off
    • Backlight LCD display
    • Simple to use, the structure is compact, portable for carrying along with measurement. 

    GENERAL SPECIFICATIONS :
    • Display : 3½ Digits LCD Backlight display.
    • Displays update cycle : 1 second
    • LCD Backlight : 7 seconds
    • Single output : AC output 2V peak (display full scale) load impedance 10KW or more earphones can be connected.
    • Static current : 20mA
    • Operating Current : 25mA 
    • Operating Temperature : 0 ~ 40°C
    • Operating humidity range : 30 ~ 90% RH 
    • Low battery indication : 6.9V ± 0.2V
    • Battery life : 20H continuous use
    • Auto power off : Turns off automatically after 60 seconds.
    • Power supply : 9V battery
    • Dimension : 67 x 30 x183 mm
    • Weight : 147g (not including battery) 


    ELECTRICAL SPECIFICATIONS : KM 63
    • Vibration pickup : Piezoelectric ceramic accelerometer (shear-type)
    • Measurement range of acceleration : 0.1 ~ 199.9m/s peak
    • Measurement range of velocity : 0.1 ~ 199.9mm/s rms2 
    • Measurement range of displacement : 0.001 ~ 1.999 mm p-p Velocity and displacement range is limited by acceleration 199.9m/s? Measurement accuracy : ± (5% 2 digits)
    • Measurement frequency range of acceleration : 10Hz ~ 1KHz (LO) 1KHz ~ 15KHz (HI)
    • Measurement frequency range of velocity : 10Hz ~ 1KHz (LO)
    • Measurement frequency range of displacement : 10Hz ~ 1KHz (LO) 


    ACCESSORIES :
    User’s manual &
    Carrying Case. 

    Vibration Meter Fluke 805

    What makes the Fluke 805 the most reliable vibration screening device available?
    • Innovative sensor design minimizes measurement variations caused by device angle or contact pressure
    • Consistent data quality at both low and high frequency ranges
    • Four-level severity scale assesses urgency of problems for overall vibration and bearing condition
    • Exportable data via USB
    • Trending in Microsoft® Excel using built-intemplates
    • Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines
    • Crest Factor technology provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
    • Colored lighting system (green, red) and on-screen comments indicate how much pressure needs to beapplied to take measurements
    • Temperature measurement with Spot IR Sensor increases diagnostic capabilities
    • On-board memory holds and saves up to 3,500 measurements
    • Audio output for listening to bearing tones directly
    • External accelerometer support for hard to reach locations
    • Flashlight for viewing measurement locations indark areas
    • Large screen with high resolution for easy navigation and viewing

    Technical specifications : 
    Vibration meter

    Low frequency range(overall measurement) : 10 Hz to 1,000 Hz
    High frequency range(CF measurement) : 4,000 Hz to 20,000 Hz
    Severity levels : Good, Satisfactory, Unsatisfactory,Unacceptable
    Vibration limit 50 g peak (100 g peak-peak)
    A/D converter 16-bit
    Signal to noise ratio 80 dB
    Sampling rate Low frequency : 20,000 Hz,  High frequency :80,000 Hz
    Real time clock backup: Coin  battery

    Sensor
    Sensitivity 100 mV / g ± 10%
    Measurement range 0.01 g to 50 g
    Low frequency range(overall measurement):10 Hz to 1,000 Hz
    High frequency range(CF measurement):4,000 Hz to 20,000 Hz
    Resolution 0.01 g
    Accuracy At 100 Hz ± 5 % of measured value

    Amplitude units
    Acceleration g, m/sec2
    Velocity in/sec, mm/sec
    Displacement mils, mm

    Infrared thermometer (temperature measurement)
    Range -20 °C to 200 °C (-4 °F to 392 °F)
    Accuracy ±2 °C (4 °F)
    Focal length Fixed, at ~3.8 cm (1.5″)

    External sensor
    Note: Fluke supports, but does not provide, external sensors.
    Frequency range 10 Hz to 1,000 Hz
    Bias voltage (to supply power) 20 V dc to 22 V dc
    Bias Current (to supply power) Maximum 5 mA

    Firmware
    Calibration Factory calibration required
    External interfaces USB 2.0 (full speed) communication
    Data capacity Database on internal flash memory
    Upgrade through USB
    Memory Up to 3,500 measurements

    Radiated emission

    Electrostatic discharge: Burst Standard EN 61000-4-2
    Electromagnetic interference Standard EN 61000-4-3
    RE Standard CISPR 11, Class A

    Environmental
    Operating temperature-20 °C to 50 °C (-4 °F to 122 °F)
    Storage temperature-30 °C to 80 °C (-22 °F to 176 °F)
    Operating humidity10 % to 95 % RH(non-condensing)
    Operating/Storage altitude: Sea Level to 3,048 meters(10,000 feet)
    IP rating IP54
    Vibration limit 500 g peak
    Drop test 1 meter

    General specifications

    Battery type AA (2) Alkaline or Lithium-ion 2V dc
    Battery life 250 measurements
    Size (L x W x H) 25.72 cm x 16.19 cm x 9.84 cm(10.13 in x 6.38 in x 3.875 in)
    Weight 1.16 kg (2.55 lb)
    Connectors : USB mini-B 7-pin, stereo audio output jack (3.5 mm Audio Plug), external sensor jack (SMB connector)

    Vibration Meter Lutron 8201 Ha

    FEATURES
    • Applications for industrial vibration monitoring : All industrial machinery vibrates. The level of vibration is auseful guide to machine condition.Poor balance, mis alignment and looseness of the structure will cause the vibration level increase, it is a sure sign that the maintenance is needed.
    • Frequency range 10 Hz - 1 kHz, sensitivity relative meet ISO 2954.
    • Supply with vibration sensor & magnetic base, full set.
    • Velocity range : 200 mm/s.
    • Acceleration range : 200 m/s^2
    • RMS & Peak measurement.
    • Data hold, Memory ( Max. & Min. )
    • Separate vibration probe.
    • Optional data acquisition software.
    • Microcomputer circuit.
    • Auto shut off saves battery life.
    • Hard carrying case include.

    SPECIFICATION:

    Display:61 mm x 34 mm supper large .LCD display. 15 mm ( 0.6" ) digit size.

    Memory Maximum & Minimum value

    Measurement Velocity, Acceleration RMS value, Peak value, Data hold, Max. & Min. value. humidity

    Operating humidity Less than 80% RH.

    Operating temperature :0 to 50 ℃ ( 32 to 122 ).

    Range:Velocity : 200 mm/s : 0.5 to 199.9 mm/s Acceleration : 200 m/s2 : 0.5 to 199.9 m/s2

    Additional Information:
    • Item Code: 8201HA
    Looking for Vibration Meter ?
    © Deluxe Electrical Corporation
     
    Desktop Site Back to top