Clamp On Earth Ground Resistance Tester

HTC 8200 Earth Clamp Meter

Approx Price: Rs 35,000 / Onwards 
Features:

  • 1999 Display
  • Large 3 ¾ (4000 Counts) LCD Display
  • Auto power Off
  • Conductor Size:32 x65
  • Max/Min, Data Hold
  • Low battery indication
  • Overload protection
  • Double Insulation Protection Level
  • Spare 5.1 Test Ring, to detect Self Precision


Clamp On Earth Ground Resistance Tester 4680 BL & BLC

Approx Price: Rs 35,000 / Onwards 
MECO Clamp - On Earth Ground Resistance & Leakage Current Tester

The faults in any Electrical System are unavoidable. Earthing plays an important role in Generation, Transmission & Distribution for safe and proper operation of any Electrical Installation.is equipped with long jaw suitable for Grounding. Earthing Strip of 65mm x 32mm. Jaw opening is anon-contact type innovative solution for measuring ground resistance and leakage current of any Electrical Installation. This method of measurement completely eliminates the use of ground and auxiliary rods thus saving lotof time and avoiding shut down. Calibration check can be verified by using the Standard Resistance Calibration Plate provided. This is an extremely handy instrument especially at place where it is next to impossible to measure Earth / Ground Resistance by conventional methods. Substantial time saving and easy operating justify the investment in these instruments.


Features

  • Non Contact Ground Resistance Measurement
  • No Auxillary Electrodes Needed
  • Data Storing Memory
  • Data Hold, Noise Signal
  • Ground Resistance Measurement 0.01 -1000
  • Suitable for Grounding with the flat strip (Jaw sized 65mm)
  • Leakage Current (0.5mA~30.00A) (Model 4680BLC)
  • Auto Ranging
  • Continuity Loop Test
  • Auto Power Off

General Specifications

  • Jaw : 65 x 32 mm Approx.
  • Conductor Size : 65 mm * 32 mm
  • Battery Type : 1.5V (AA) x 4 (Alkaline)
  • Display : 4 Digit 9999 counts LCD
  • Range Selection : Auto
  • Memory : 99 Sets
  • Overload Indication : OL
  • Low Battery Indication :B
  • Operating Environment : -10°C - 55°C
  • Dimensions : 293 x 90 x 66 mm
  • Weight : 1250 gms Including Battery (approx)
  • Configurable Alaram : Resistance : 1~199Current : 1~499mA

  • Accessories :
  1. Resistance Calibration Plate x 1,
  2. Battery 1.5V (AA) x 4 (Installed),
  3. User Manual x 1,
  4. Carry Bag x 1

Clamp On Earth Ground Resistance & Leakage Current Testers

Approx Price: Rs 35,000 / Onwards 
MECO Clamp - On Earth Ground Resistance Tester MODEL 4680B

The faults in any Electrical System are un avoidable. Earthing plays an important role in Generation, Transmission & Distribution for safe and proper operation of any Electrical Installation.is equipped with long jaw suitable for Grounding. Earthing Strip of 65mm x 32mm. Jaw opening is a non-contact type innovative solution for measuring ground resistance and leakage current of any Electrical Installation. This method of measurement completely eliminates the use of ground and auxiliary rods thus saving lotof time and avoiding shut down. Calibration check can be verified by using the Standard Resistance Calibration Plate provided. This is an extremely handy instrument especially at place where it is next to impossible to measure Earth / Ground Resistance by conventional methods. Substantial time saving and easy operating justify the investment in these instruments.MECO 4680L/4680LC Clamp-On Earth / Ground Resistance Tester



Features:


  • Non Contact Ground Resistance Measurement
  • No Auxillary Electrodes Needed
  • Data Storing Memory
  • Data Hold, Noise Signal
  • Ground Resistance Measurement 0.01 -1000
  • Suitable for Grounding with the flat strip (Jaw sized 65mm)
  • Leakage Current (0.5mA~30.00A) (Model 4680LC)
  • Auto Ranging
  • Continuity Loop Test
  • Auto Power Off

Specifications:
  • Jaw : 65 x 32 mm Approx.
  • Conductor Size : 55 mm * 32 mm
  • Battery Type : 1.5V (AA) x 4 (Alkaline)
  • Display : 4 Digit 9999 counts LCD
  • Range Selection : Auto
  • Memory : 99 Sets
  • Overload Indication : OL
  • Low Battery Indication :B
  • Operating Environment :-10°C - 55°C
  • Dimensions : 285 x 90 x 60 mm
  • Weight : 1250 gms Including Battery (approx)

  • Accessories :
  1. Resistance Calibration Plate x 1
  2. Battery (installed) x 1
  3. User Manual x 1
  4. Carry Box x 1
  5. Cleaning Brush x 1


          Applications:

          Hazards due to improper earth / ground happen around us everyday. Systems are becoming more and more complex and faults in any system are unavoidable. Every electrical equipment, appliance or network must be properly earthed to allow a low resistance path for dissipation of leakagecurrent into the earth. MECO Clamp-On Earth / Ground Resistance Tester can measure accurately within a few minutes the ground resistance & ACcurrent (load & leakage) of all types of installations by just clamping to the grounding lines without disconnecting the circuit or driving auxiliary electrodes. A few of the applications have been illustrated below :
           

          Motwane Digital Earth Clamp Tester Dect

          Approx Price: Rs 35,000 / Onwards 
          Digital Earth Clamp Tester DECT-2

           FEATURES:
          • Long Jaw size: 65mm x 32mm Ø. The unique long Jaw is particularly suitable where grounding is done by flat steel or copper strips .
          • Range : 0.01 Ù to 1000 W.
          • Maximum Resistance Measurement Resolution 0.001W.
          • Display 4 Digits LCD, 47 x 28.5 mm in Length.
          • Over range(OL W) as well as low range (L0.01W) indication.
          • Low bat indication and Data hold facility.
          • Double insulation level and also protected from External magnetic as well as Electric field.
          • Automatic Range Selection.
          • Automatic Self Calibration.
          • Single Measuring Time : 1 second.

          GENERAL SPECIFICATIONS:

          • Power : 6VDC (AA 1.5 V x 4)
          • Dimensions : 298mm X 90mm X 66mm (Approx.) for long jaw.
          • Net Weight : Approx. 1320g for long jaw size. 


          APPLICATION AREAS:

          • Measures Earth Resistance at electrical ground rod and grid.
          • Use for testing quality of grounding without disconnecting the ground rod under test.
          • Conduct field surveys fast and effectively and retrieve and analyze readings a later time.
          • Use on telecommunication Tower's grounding.
          • Useful in finding earth fault such as discontinuation or loose contact of earthing strips of cables.
          • To find the resistance of earth pit. 


          SUPPLIED ACCESSORIES:

          • Carrying Case
          • Standard Loop Resistance of 5.1WI
          • nstruction Manual 

          Kusam Meco Clamp On Type Earth Resistance Tester 1620 1720

          Approx Price: Rs 35,000 / Onwards 
          KUSAM MECO KM 1620 single-jaw type Earth Resistance Tester is widely used forearth resistance testing of the equipments in the field of power,telecommunication, as well as the other electrical equipments. It features easy operation, high-accuracy and good adaptation of testing environment.

          APPLICATION :

          1. Earthing of electric power and distribution system.
          2. Telecom system earthing.
          3. Earthing of lightning rod and oil tanks.
          4. CAT III network earthing.
          5. Earthing of multi-storied building and warehouse etc.
          6. Earth Pit Resistance.

          FUNCTIONS AND FEATURES:
          • Beyond the limitation of the traditional method of earth resistance testing, no assistance poles are required,with easy and convenient operation.
          • No error of electrodes arranging, which results in good consistency under the condition of earth resistance testing.
          • Equipped with standard testing coil which can be used to do the self-testing with accuracy.
          • With a compact & sturdy structure, it can operate under the condition of harsh-environment.
          • Intelligent and automatic measurement, which can guarantee the safety of operation.
          • High-Low limits settable for Resistance & Current.
          • Hold Key for lock / release display (KM 1620)
          • Mode Key - Switch key of function mode (Resistance measurement / Current measurement / data access). (KM 1720)
          • Set Key - Function key combinations. (KM 1720)

          GENERAL SPECIFICATIONS :

          • Jaw Opening Size : 32 mm
          • Display screen : 4 digit LCD Backlight,47 x 28.5 mm in length
          • Operating temperature : -10 C ~ 55 C
          • Operating Humidity : 10% ~ 90%RH
          • Protection grade : double insulation
          • External Magnetic Field : < 40A / m
          • External Electric Field : < 1V/m? Measurement Resistance Frequency :> 1 KHz
          • Maximum Resistance Measurement Resolution : 0.001W
          • Resistance Measurement Range :0.01 - 1000 W
          • Range selection : Automatic
          • Max. Bus Bar Dimension : 32 mm × 65 mm.
          • Calibration : Automatic self calibration
          • Sampling Time : 1 second
          • Current Measuring Range :0.00 - 20.0A (KM 1720)
          • Measured Current Frequency : 50/60Hz (KM 1720)
          • Storable Measurement Data : 99 Units (KM 1720)
          • Setting Range of Resistance Alarm Critical Value :1 - 199W (KM 1720)
          • Setting Range of Current Alarm Critical Value :1 - 499mA (KM 1720)
          • Power supply : 4 X AAA alkaline dry battery (6V)
          • Weight : 1160g (inclusive of battery)
          • Dimension : 285(L) x 85(W)mm, and thickness of 56mm

          SAFETY :EMC Directive 2004/108/EC for CE marking
          Emission : EN 61326-1:2006 Class B;EN 55011:2009/A1:2010 Group 1 Class B
          Immunity : EN 61326-1:2006; EN61000-4-2:2009;EN 61000-4-3:2006/A2:2010


          ACCESSORIES :

          Standared Testing Coil (5.1W),
          Strong Carrying Case,
          Batteries & User Manual.
          Looking for Clamp On Earth Ground Resistance Tester ?
          © Deluxe Electrical Corporation
           
          Desktop Site Back to top